Extreme Networks Altitude 3500 Series, Product Reference Manual

Page: 113 / 594

Altitude 3500 Series Access Point Product Reference Guide
113
C H A P T E R
5
Network Management
Refer to the following for network management configuration activities supported by the access point
user interface:
●
Configuring the LAN Interface on page 113
●
Configuring WAN Settings on page 125
●
Enabling Wireless LANs (WLANs) on page 133
●
Configuring WIPS Server Settings on page 161
●
Configuring Router Settings on page 163
●
Configuring IP Filtering on page 166
Configuring the LAN Interface
The Altitude 35xx has one physical LAN port supporting two unique LAN interfaces. The Altitude 35xx
LAN port has its own MAC address. The LAN port MAC address is always the value of the Altitude
35xx WAN port MAC address plus 1. The LAN and WAN port MAC addresses can be located within
the LAN and WAN Stats screens.
For information on locating the access point’s MAC addresses, see “Viewing WAN Statistics” on
page 231 and “Viewing LAN Statistics” on page 234 .
Use the LAN Configuration screen to enable one (or both) of the access point’s LAN interfaces, assign
them names, define which LAN is currently active on the access point Ethernet port and assign a
timeout value to disable the LAN connection if no data traffic is detected within a defined interval.