Configuring Access Point Security
Altitude 3500 Series Access Point Product Reference Guide
218
To configure the RADIUS Server:
1
Select
System Configuration
>
User Authentication
>
Radius Server
from the menu tree.
2
From within the
Data Source Configuration
field, use the
Data Source
drop-down menu to select the
data source for the RADIUS server.
NOTE
When using LDAP, only PEAP-GTC and TTLS/PAP are supported.
3
Use the
TTLS/PEAP Configuration
field to specify the RADIUS Server default EAP type, EAP
authentication type and a Server or CA certificate (if used).
Local
An internal user database serves as the data source. Use
the
User Database
screen to enter the user data. For more
information, see
“Managing the Local User Database” on
page 224
.
LDAP
If LDAP is selected, the controller will use the data in an
LDAP server. Configure the LDAP server settings on the
LDAP screen under RADIUS Server on the menu tree. For
more information, see
“Configuring LDAP Authentication”
on page 220
.
Summary of Contents for Altitude 3500 Series
