Extreme Networks Altitude 3500 Series, Product Reference Manual

Page: 336 / 594

CLI Reference
Altitude 3500 Series Access Point Product Reference Guide
336
AP35xx>admin(network.wireless.security)> create
Defines the parameter of AP35xx security policies.
Syntax
create Defines the parameters of a
security policy.
show Displays new or existing security
policy parameters.
set sec-
name <name> Sets the name of the security
policy.
auth <authtype> Sets the authentication type for
WLAN <idx> to <type> (
none ,
eap , or kerberos ).
Note: Kerberos parameters are
only in affect if “kerberos” is
specified for the authentication
method (set auth <type>).
kerb realm <name> Sets the Kerberos realm.
server <sidx> <ip> Sets the Kerberos server <sidx>
(
1 -primary, 2 -backup, or 3 -
remote) to KDC IP address.
port <sidx> <port> Sets the Kerberos port to <port>
(KDC port) for server <ksidx> (
1 -
primary, 2 -backup, or 3 -remote).
Note: EAP parameters are only
in affect if “eap” is specified for
the authentication method (set
auth <type>).
eap server <sidx> <ip> Sets the RADIUS server ( 1 -
primary or as 2 -secondary) IP
address <ip>.
port <sidx> <port> Sets the RADIUS server <sidx>
(
1 -primary or 2 -secondary)
<port> (1-65535).
secret <sidx> <secret> Sets the EAP shared secret
<secret> (1-63 characters) for
server <sidx> (1-primary or 2-
secondary).
The default password is
“admin123”
reauth mode <mode> Enables or disables EAP
reauthentication.
period <time> Sets the reauthentication period
<period> in seconds (
30 - 9999 ).
retry <number> Sets the maximum number of
reauthentication retries <retry>
(
1 - 99 ).
accounting mode <mode> Enable or disable RADIUS
accounting.
server <ip> Set external RADIUS server IP
address.