manualshive.com logo in svg

Extreme Networks Altitude 3500 Series, Product Reference Manual

Share
Download
Extreme Networks Altitude 3500 Series Product Reference Manual Download Page 294

 

CLI Reference

Altitude 3500 Series Access Point Product Reference Guide

294

Network WAN Commands

AP35xx>admin(network.wan)>

Displays the WAN submenu. The items available under this command are shown below. 

For an overview of the WAN configuration options using the applet (GUI), see 

“Configuring WAN 

Settings” on page 125

. 

show

Displays the AP35xx WAN configuration and the AP35xx’s current PPPoE configuration.

set

Defines the AP35xx’s WAN and PPPoE configuration.

nat

Displays the NAT submenu, wherein Network Address Translations (NAT) can be defined.

vpn

Goes to the VPN submenu, where the AP35xx VPN tunnel configuration can be set.

content

Goes to the outbound content filtering menu.

dyndns

Displays the Dynamic DNS submenu, wherein dyndns settings can be defined.

..

Goes to the parent menu.

/

Goes to the root menu.

save

Saves the current configuration to the AP35xx system flash.

quit

Quits the CLI and exits the current session. 

Summary of Contents for Altitude 3500 Series



















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands