Extreme Networks Altitude 3500 Series, Product Reference Manual

Page: 323 / 594

Altitude 3500 Series Access Point Product Reference Guide
323
AP35xx>admin(network.wireless.wlan)> create
Defines the parameters of a new WLAN.
Syntax
create
ess : set ESS ID
wlan-name : set WLAN name
11a : enable/disable 802.11a radio
11bg : enable/disable 802.11b/g radio
mesh : enable/disable Client Bridge Mesh Backhaul
hotspot : enable/disable Hotspot Mode
max-client : set maximum number of Clients
:
security : set Security Policy name
acl : set MU Access Control Policy name
passwd : set WLAN Kerberos password
:
no-mu-mu : enable/disable Disallow MU-MU Communication
sbeacon : enable/disable Use Secure Beacon
bcast : enable/disable WLAN Accept Broadcast ESSID
qos : set Quality of Service Policy name
rate-limiting : enable/disable Per-MU Rate Limiting
limit-w2wl : set per-MU rate limit (wired-to-wireless)
limit-wl2w : set per-MU rate limit (wireless-to-wired)
Example
admin(network.wireless.wlan.create)>show wlan
ESS Identifier :
WLAN Name :
802.11a Radio : not available
802.11b/g Radio : not available
Client Bridge Mesh Backhaul : not available
Hotspot : not available
Maximum MUs : 127
Security Policy : Default
MU Access Control : Default
Kerberos User Name :
Kerberos Password : ********
Disallow MU to MU Communication : disable
Use Secure Beacon : disable
Accept Broadcast ESSID : enable
QoS Policy : Default
per-mu rate limiting : disable
per-mu rate limit (wired-to-wl) : 1000 kb
per-mu rate limit (wl-to-wired) : 1000 kb
admin(network.wireless.wlan.create)>show security
----------------------------------------------------------------------
Secu Policy Name Authen Encryption Associated WLANs
----------------------------------------------------------------------
1 Default Manual no encrypt Front Lobby
2 WEP Demo Manual WEP 64 2nd Floor
3 Open Manual no encrypt 1st Floor