Extreme Networks Altitude 3500 Series, Product Reference Manual

Page: 260 / 594

CLI Reference
Altitude 3500 Series Access Point Product Reference Guide
260
Accessing the CLI via Telnet
To connect to the AP35xx CLI through a Telnet connection:
1 If this is your first time connecting to your access point, keep in mind the access point uses a static
IP WAN address (10.1.1.1). Additionally, the access point’s LAN port is set as a DHCP client.
2 Enter the default username of admin and the default password of admin123 . If this is your first time
logging into the access point, you are unable to access any of the access point’s commands until the
country code is set. A new password will also need to be created.
Admin and Common Commands
AP35xx>admin>
Displays admin configuration options. The items available under this command are shown below.
help Displays general user interface help.
passwd Changes the admin password.
summary Shows a system summary.
network Goes to the network submenu
system Goes to the system submenu.
stats Goes to the stats submenu.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.