PL Center_mix
This setting indicates the level shift applied to the center channel when adding to
the left and right outputs.
Options are: +3.0dB, +1.5dB, 0.0dB, -1.5dB, -3.0dB, -4.5dB, -6.0dB, -7.5dB, -
9.2dB and –999dB (muted). Default is
0dB
.
PL Surrround_mix
This setting indicates the level shift applied to the surround channels when adding
to the left and right outputs.
Options are: +3.0dB, +1.5dB, 0.0dB, -1.5dB, -3.0dB, -4.5dB, -6.0dB, -7.5dB, -
9.2dB and –999dB (muted). Default is
1.5dB
.
PL LFE_En
The status of the LFE Channel parameter indicates whether an LFE Channel (Low
Frequency Effects channel) is present within the bitstream. Can be set to enabled,
disabled or Auto (in which case the data in MD_Enc1 is followed). Default is
Disabled
.
PL LFE_MixLevel
This setting indicates the level shift applied to the LFE channel when adding to the
left and right outputs. Can be set between -21dB and +10dB. Default is
7dB
.
5.8.
Embedding
Setting
Description
#Emb-Mode
With Emb-Mode you select how the audio in should be embedded into the
video: overwrite the existing audio, or Append. Default is
Overwrite
.
#Emb_GrpSel
With this setting you select which audio groups of embedder 1 should be
enabled for embedding audio into video outputs 1 and 2. The group1, group2,
group3 or group4 groups can be set separately to
ON
or
OFF
in the selection
list. You can also choose to not enable any of the audio groups by setting this
item to
____
. By default it is set to
1234
, All groups active.
5.9.
Emb Audio Out
Setting
Description
#SourceEmb-A1 ~
#SourceEmb-A4
With these settings you can select where the corresponding audio channels
(channel A1 through channel A4) of embedder A are coming from:
SDI
: Audio comes from the SDI input
DecoderOut
: Audio comes from the Dolby E decoder (8 ch)
EncoderOut
: Audio comes from the Dolby encoder (8 ch)
AddOn01/16
: Audio comes from add-on bus (first 16 ch)
AddOn17/32
: Audio comes from add-on bus (second 16 ch).
24
| November 2021 | Issue 1.00.B
Summary of Contents for Synapse GED100
