EVS Synapse GED100, Manual

Page: 38 / 74

Metadata_Preset Here you select which Metadata preset you want to activate. Editing the preset
will be live.
#MD_Preset_Name To help remember which preset is used for what cases, you can name your
active preset with this setting (maximum of 16 characters).
#ProgramConfig This item sets the program configuration. Can be one of the following values:
• 7.1 • 4x2
• 5.1+2 • 3x2
• 5.1 • 2+2
• Ext_Meta (use value as set in metadata source).
#Frame_Rate With this you can set the metadata ‘framerate’ value. Can be 23.98, 24, 25,
29.97, 30, auto or set to use the setting in the external metadata input (Ext_
meta).
#MD_Prog_1 Since a bitstream can contain up to 4 separate audio streams (e.g. when the
program config is 4x2), you can have 4 separate metadata sets. With MD_Prog_1
you select which metadata set should be used for the first audio program. Can
be any set from A to H. You can also choose to use the program as set in the
metadata source (Ext_Meta), in which case the entire program is kept and no
preset is used. Default is set A.
#MD_Prog_2 With MD_Prog_2 you select which metadata set should be used for the second
audio program (if there is any). Can be any set from A to H. You can also choose
to use the program as set in the metadata source (Ext_Meta), in which case the
entire program is kept and no preset is used. Default is set B.
#MD_Prog_3 With MD_Prog_3 you select which metadata set should be used for the third
audio program (if there is any). Can be any set from A to H. You can also choose
to use the program as set in the metadata source (Ext_Meta), in which case the
entire program is kept and no preset is used. Default is set C.
#MD_Prog_4 With MD_Prog_4 you select which metadata set should be used for the fourth
audio program (if there is any). Can be any set from A to H. You can also choose
to use the program as set in the metadata source (Ext_Meta), in which case the
entire program is kept and no preset is used. Default is set D.
5.13. Metadata Prog
Setting Description
MD_Prog_Set With this item you can select the metadata set whose parameters you want to
adjust. Options are
A through H . Default is parameter set A . All following items
preceded by ‘#’ are workers of this set. Unless this parameter is set to a metadata
set that is currently in use, changing the metadata settings will have no direct
effect on the output.
30 | November 2021 | Issue 1.00.B