EVS Synapse GED100 Manual Download Page 12

Page: 12 / 74

How to Change Parameters Using the Front Panel Control

With the display as shown below:

Pressing

selects the SFS10 in frame slot 01.

The display changes to indicate that the SFS10 has been selected. In this example the Settings menu
item is indicated.

Pressing the

selects the menu item shown, in this example Settings.

(Pressing

will change to a different menu, e.g. Status, Events).

The display changes to indicate that the SFS10 Settings menu item SDI-Format has been selected and
shows that its current setting is Auto.

Pressing the

selects the Settings item shown, in this example SDI-Format.

(Pressing

will change to a different setting, e.g. Mode, H-Delay).

The display changes to indicate that the SFS10 Edit Setting menu item SDI-Format has been selected.

To edit the setting of the menu item, press

All menu items can be monitored and/or changed in this way. Changing a setting has an immediate
effect.

| November 2021 | Issue 1.00.B

Summary of Contents for Synapse GED100











































































Search results

Summary of Contents for Synapse GED100

Reviews:

Related manuals for Synapse GED100

Brands by name

Popular brands

EVS Synapse GED100, Manual

Search results

Summary of Contents for Synapse GED100

Reviews:

Related manuals for Synapse GED100

Brands by name

Popular brands