EVS Synapse GED100, Manual

Page: 47 / 74

S352_Insert S352_Insert enables the Video Payload Identifier insertion in the HANC space. It
enables the user to insert or passthrough (On) the S352 Dynamic range and
colorspace payload. When this menu item is set to On (default), it will generate a
SMPTE ST352-2013 packet and overwrite the existing one (for both Luminance
and Chrominance).When it is set to Off, it will pass the packet to the output as-is
(only on Luminance).In HD 1080i for ATC-LTC transparency, the user may switch
it Off to pass the ATC-LTC HANC packet on line 10.
Output-Matrix This setting will only work if S352_Insert is set to On. It enables you to set the
colorspace in REC709 (default) or REC2020. When set to either REC709 or
REC2020, the S352 data is included in the s352 packet. (This does not change
anything in the picture.)
HDR_Curve_Out The dynamic range is the range of information between the lightest and darkest
part of an image, also known as an image’s luminosity. This setting enables you to
set the dynamic range in standard dynamic range SDR (default), HLG, PQ or
SLOG3. With all of these settings, the S352 data is included in the S352 packet.
(This does not change anything in the picture.)
Bit_Depth_Out Bit depth is the range of bits being used. This setting enables you to set the bit
depth to Narrow (8bits) or Full (10bits). When set to either Narrow (default) or Full,
it includes this data in the S352 packet. (This does not change anything in the
picture.)
INSTALLATION AND OPERATION MANUAL
Synapse GED100 | 5. Settings Menu | 39