EVS Synapse GED100, Manual

Page: 49 / 74

Phaser1_H_Pos This item shows the distance of SDI-Input1 to REF timing (write-read timing)
of the autophaser. It is directly related to a correct functioning of the
autophaser. When the SDI-Input1 to REF-timing is close, the function of the
autophaser becomes critical. The Phaser1-Offset setting can be used to
tune the Phaser1_H_Pos.
When the Phaser-Status setting is set to Off , or when Lock Mode is set to
SDI1, SDI2 or Auto-SDI, or when Lock-Mode is set to Ref1 or Ref2 and
status-item Ref-Format shows
NA , Phaser1_H_Pos will show 0px.
Phaser2_H_Pos This item shows the distance of SDI-Input2 to REF timing (write-read timing)
of the autophaser. It is directly related to a correct functioning of the
autophaser. When the SDI-Input2 to REF-timing is close, the function of the
autophaser becomes critical. The setting Phaser2-Offset can be used to
tune the Phaser2_H_Pos.
When Phaser-Status setting is set to Off , or when Lock Mode is set to SDI1,
SDI2 or Auto-SDI, or when Lock-Mode is set to Ref1 or Ref2 and status-item
Ref-Format shows
NA , Phaser2_H_Pos will show 0px.
Phaser1_Stat This item shows the status of the autophaser. It uses the value shown in
Phaser1_H_Pos to calculate 3 working regions for the autophaser: Safe,
Warning and Critical.
Safe : Phaser1_H_Pos shows a value > 50px
Warning : Phaser1_H_Pos shows a value > 20px and < 50px
Critical : Phaser1_H_Pos shows a value < 20px
When Phaser-Status setting is set to Off , or when Lock Mode is set to SDI1,
SDI2 or Auto-SDI, or when Lock-Mode is set to Ref1 or Ref2 and status-item
Ref-Format shows
NA , Phaser1_Stat will show NA .
Phaser2_Stat This item shows the status of the autophaser. It uses the value shown in
Phaser2_H_Pos to calculate 3 working regions for the autophaser: Safe,
Warning and Critical.
Safe : Phaser2_H_Pos shows a value > 50px
Warning : Phaser2_H_Pos shows a value > 20px and < 50px
Critical : Phaser2_H_Pos shows a value < 20px
When Phaser-Status setting is set to Off , or when Lock Mode is set to SDI1,
SDI2 or Auto-SDI, or when Lock-Mode is set to Ref1 or Ref2 and status-item
Ref-Format shows
NA , then Phaser2_Stat will show NA .
SDI1-Ref_Offset This item indicates the offset between SDI1 and the reference (if present).
SDI2-Ref_Offset This item indicates the offset between SDI2 and the reference (if present).
Locked-To Displays what the card is locked to: Ref, SDI1, SDI2 or Not Locked.
Active-Out1 Displays what the current active output is on SDI output 1. Can be SDI1 or
SDI2.
INSTALLATION AND OPERATION MANUAL
Synapse GED100 | 6. Status Menu | 41