EVS Synapse GED100, Manual

Page: 37 / 74

MetaLoss With this setting you select to which metadata preset the card should switch in
case the above metadata source is lost. Can be any metadata preset (MDPreset
1 ~ MDPreset 7). Can also be switched to
off , in which case the preset will not be
changed in case of a metadata loss (default).
MetaDet With this setting you select to which metadata preset the card should switch in
case metadata is detected in the above selected source. Can be any metadata
preset (MDPreset 1 ~ MDPreset 7).
Besides the 7 MDPresets, you can set it to S2020-SDID , ProgramConfig ,
Previous (last active preset before the signal was lost) or off (don’t switch
presets when signal returns, default).
S2020-SDID switches the card to a predefined preset according to the value of
the SDID:
• 00 (none) → MDPreset 1
• 01 (Ch01/02) → MDPreset 1
• 02 (Ch03/04) → MDPreset 2
• 03 (Ch05/06) → MDPreset 3
• 04 (Ch07/08) → MDPreset 4
• 05 (Ch09/10) → MDPreset 5
• 06 (Ch11/12) → MDPreset 6
• 07 (Ch13/14) → MDPreset 7
• 08 (Ch15/16) → MDPreset 7
ProgramConfig switches the card to a predefined preset according to the value
of the metadata program configuration:
• 7.1 → MDPreset 1
• 5.1+2 → MDPreset 2
• 5.1 → MDPreset 3
• 4x2 → MDPreset 4
• 3x2 → MDPreset 5
• 2+2 → MDPreset 6
• Other → MDPreset 7
MD-LossDetect_2 You can set a second metadata loss detection on a different metadata input with
this setting. It works the same as MD-LossDetect, only the actions performed
are defined with MetaLoss_2 and MetaDet_2. Default is
Off .
MetaLoss_2 Same as MetaLoss, only for the source set with MD-LossDetect_2.
MetaDet_2 Same as MetaDet, only for the source set with MD-LossDetect_2.
INSTALLATION AND OPERATION MANUAL
Synapse GED100 | 5. Settings Menu | 29