EVS Synapse GED100, Manual

Page: 25 / 74

(b) This setting creates one normal stereo Pro Logic II output on encoder out 2 and one
normal 2.0 DD(+) output on encoder out 3. This normal 2.0 DD(+) stream is encoded out
of the AES inputs and is not a Pro Logic II audio stream. Schematically this looks as
follows:
Transcode settings:
The following Enc_config settings are special settings when using a Dolby Digital input. This signal is
converted to Dolby Digital Plus when using these settings. For example, when the setting 2 or TC is
applied, the Dolby Digital input is transcoded to Dolby Digital Plus, but when the Dolby Digital input
signal is lost, the designated PCM inputs will be converted to a 2.0 DD(+) output automatically.
Setting Encoder out 1 Encoder out 2 Encoder out 3 Encoder out 4
2 or TC DD+ 2.0 - - -
2+2 or TC DD+ 2.0 DD+ 2.0 - -
5.1 or TC DD+ 5.1 - - -
TC DD+ 2.0 - - -
The following schematics provide visual representations of some of the #Enc_config settings.
INSTALLATION AND OPERATION MANUAL
Synapse GED100 | 5. Settings Menu | 17