EVS Synapse GED100, Manual

Page: 44 / 74

#Lt/Rt_C_Dwnmx Lr/Rt Center Mix Level. This setting indicates the level shift applied to the center
channel when adding to the left and right outputs during downmixing to an Lt/rt
output. Its operation is similar to the surround downmix level in the Universal
metadata. Options are 0dB, -1.5dB, -3.0dB, -4.5dB, -6.0dB and -999dB.
You can also choose to use the metadata settings in the external program (Ext_
meta). Default is Ext_meta.
#Lo/Ro_C_Dwnmx Lo/Ro Center mix level. This setting indicates the level shift applied to the center
channel when adding to the left and right outputs when downmixing to a Lo/Ro
output. When Extended BSI parameters are active, this parameter is used instead
of the Center Mix Level parameter in the universal parameters.Options are +3dB,
+1.5dB, 0dB, -1.5dB, -3.0dB, -4.5dB, -6.0dB and -999dB. You can also choose to
use the metadata settings in the external program (Ext_meta). Default is -3dB.
#Lo/Ro_S_Dwnmx Lo/Ro Surround Mix level. This setting indicates the level shift applied to the
surround channels when downmixing to a Lo/Ro output. When extended BSI
parameters are active, this parameter is used instead of the surround mix level
parameter in the universal parameters. Options are -1.5dB, -3.0dB, -4.5dB, -
6.0dB and -999dB. You can also choose to use the metadata settings in the
external program (Ext_meta). Default is -3dB.
#Dolby_Srnd EX This parameter is used to identify the encoded audio as surround EX encoded
material. It is only used if the encoded audio has two surround channels. An
amplifier or receiver with Dolby Digital EX decoding can use this parameter as a
flag to switch the decoding on or off automatically. The behavior is similar to the
Dolby Surround Mode parameter. Options are
Not Indic. , NotDolbySrnd or
DolbySrnd .
You can also choose to use the metadata settings in the external program (Ext_
meta). Default is Ext_meta.
#D_HeadPhone This metadata item indicates whether or not the program has been Dolby
Headphone-encoded. This information is not used by the Dolby decoder, but may
be used by other portions of the audio reproduction equipment. Can be set to
Not
Indicated , Headph (i.e. audio is Dolby Headphone encoded) or Not_Headph (i.e.
audio is not Dolby Headphone encoded).
You can also choose to use the metadata settings in the external program (Ext_
meta). Default is Ext_meta.
#ADConvType This parameter allows audio that has passed through a particular A/D conversion
stage to be marked as such, so that a decoder may apply the complementary D/A
process. Can be set to Standard or HDCD.
You can also choose to use the metadata settings in the external program (Ext_
meta). Default is Ext_meta.
36 | November 2021 | Issue 1.00.B