EVS Synapse GED100, Manual

Page: 35 / 74

5.11. S2020
Setting Description
Extract_Line With this item you set a line between line 0 and line 1125 from where you want
to extract the metadata from the input. By default set to line 0, which indicates
Auto-Mode.
Extract_Ass_Ch One attribute of the S2020 metadata is the association channel. The
association channel is the channel to which the metadata is connected. You
can select the S2020 metadata to be extracted from one of the possible
associated channel pairs ranging from Ch01/02 to Ch15/16. Can also be set to
None (if there is no association set in the S2020 source) or to Auto (in which
case the S2020 is extracted from the first available associated channel).
#S2020-Emb With this setting you decide whether you want to overwrite or to switch off
metadata (S2020) inserting.
#S2020Emb_MD_Src Here you set the metadata source of the S2020 embedder. Can be from the
SDI input (SDI, default), from the Dolby E input (DecoderOut), from the I/O-
panel RJ45 metadata input (Local), or from the card’s internal metadata
generator (ShufflerOut).
Insert_Line With this setting you set a line to which the S2020 data should be inserted. Can
be set between line 1 and line 1125. Default is line 9.
Insert_Method There are 2 methods to insert S2020 (refer to the S2020 SMTPE document).
Can be set to
Method A or Method B . Default is Method B .
#Insert_Ass_Ch With this setting you select one of the 8 channel pairs (Ch1/2 through Ch15/16)
to which the metadata should be associated. Can also be set to
None (which is
also a valid value of the metadata item).
5.12. Metadata
For more information about Dolby Metadata, please read the metadata guide on the Dolby website
(http://www.dolby.com/assets/pdf/tech_library/18_Metadata.Guide.pdf)
The GED100 has extensive metadata functionalities. The following schematic provides a visual overview
of how the metadata is handled:
INSTALLATION AND OPERATION MANUAL
Synapse GED100 | 5. Settings Menu | 27