GMS
plus
Safety
2.
9
2.3
Safety instructions specific to the unit
Notes for the operator
• This instruction manual and the technical documentation of the
installed components of the unit must always be available at
the installation site!
• Always observe any supplementary, generally valid legal
regulations or other binding rules and ensure their compliance!
These rules and regulations apply to:
• work safety
• accident prevention
• environmental protection
• hygiene
• first-aid
• All personnel charged with installation, commissioning,
operation, maintenance and repair of the unit must read and
understand this instruction manual, particularly the safety
instructions!
• Never attempt to perform any modifications, extensions or
conversions on the unit which could have an adverse affect on
safety without the written approval of the manufacturer!
• Only use spare parts which have been approved by the
manufacturer. This is always guaranteed when original spare
parts are purchased.
• Always observe the intervals for regular maintenance or
inspection work which are either prescribed or stated in the
instruction manual.
• Never use corrosive cleaning agents!
Use only a damp cloth to clean the unit.
Notes for operating personnel
• Always read the instruction manual, in particular the safety
instructions, before you operate the unit for the first time!
• Never employ any working methods which could endanger
safety!
• Always comply with the prescribed values for connection
voltage as well as ambient and operating conditions!
• Never deactivate any safety features!
• During operation of the unit, unexpected incorrect functions
may occur that result from failure or errors in the control
system. In the event of such safety-relevant changes in the
operating performance of the device, switch it off immediately
and remedy the fault or have it remedied immediately!
• Even when the unit is switched off, external voltage may still
be applied.
• In the event of a fire, always switch the unit off with the main
switch on the outside of the unit or with the external main
circuit breaker or fuse!
Summary of Contents for WALLACE & TIERNAN GMS PLUS
