2. Safety
DEPOLOX® 400 M
6
EN
2.
Safety
2.1
Intended use
The DEPOLOX® 400 M disinfection analyzer
with installed sensors is designed exclusively
for measurement of the parameters free chlo-
rine, total chlorine, chlorine dioxide, ozone,
potassium permanganate, pH value, ORP vol-
tage (Redox), fluoride and temperature in
drinking water.
The operational safety is only guaranteed if
the DEPOLOX® 400 M is used in accordance
with its intended application. The DEPOLOX®
400 M may only be used for the purpose defi-
ned in the order and under the installation,
operating and ambient conditions specified in
this operating manual.
All inspection and maintenance work must be
carried out at the specified intervals.
Compliance with the intended use also inclu-
des reading this operating manual and obser-
ving all the instructions therein.
The owner/operator of the installation bears
sole responsibility for consequences of any
use that does not conform with the installa-
tion’s intended use.
2.2
General safety instructions
The manufacturer places great emphasis on
safety when working on or with the DEPO-
LOX® 400 M disinfection analyzer. This is taken
into account, starting with the design of the
installation, by the integration of safety fea-
tures.
Safety regulations
The safety instructions in this documentation
must be observed at all times. Additional
industry-wide or in-house safety regulations
also continue to apply.
Safety instructions on the DEPOLOX® 400 M
All safety instructions attached to the DEPO-
LOX® 400 M must be observed. These instruc-
tions must always be clearly legible and
complete.
State-of-the-art technology
The DEPOLOX® 400 M has been constructed in
accordance with the technological state-of-
the-art and the accepted rules of safety engi-
neering. However, if the DEPOLOX® 400 M is
used by persons who have not been adequa-
tely instructed, danger to the life and limb of
such persons or third parties and damage to
the unit itself or to other property cannot be
ruled out. Work not described in this operating
manual must be performed only by authorized
personnel.
Personnel
The operator of the overall system must
ensure that only authorized and qualified spe-
cialist personnel are permitted to work with
and on the DEPOLOX® 400 M. “Authorized
specialist personnel” are trained, skilled per-
sonnel employed by the owner/operator, the
manufacturer or, if applicable, the service
partner. Work on electrical components must
be carried out by qualified electricians.
Spare parts / components
Trouble-free operation of the DEPOLOX®
400 M is only guaranteed if original spare
parts and components are used in precisely
the combination described in this operating
manual. Failure to observe this instruction
may lead to malfunctions or damage to the
DEPOLOX® 400 M.
Extensions and conversions
Any modifications, extensions or conversions
to the DEPOLOX® 400 M that could impair its
safety require the written approval of the
manufacturer.
Electrical power
Only qualified electricians or trained person-
nel supervised by a qualified electrician are
permitted to perform any work on electrical
components and must do so in accordance
with valid electro-technical regulations.
During normal operation, the controller must
remain closed. Connect power cables in accor-
dance with the wiring diagram.
DANGER
Risk of injury or death!
The DEPOLOX® 400 M must not be operated
with flammable liquids
DANGER
Risk of injury or death!
External voltages may still be connected
even if the operating voltage is switched off.
In the event of a fault in the electrical power
supply, switch the DEPOLOX® 400 M off
immediately.
