4
32
Eversense CGM User Guide
This section describes how to link the sensor and smart transmitter after your health care provider
has inserted the sensor. Only your health care provider can insert the sensor. See “About the Sensor”
to learn more.
If the smart transmitter was sent directly to you, be sure to bring it and your mobile device to your insertion
appointment. Once your health care provider has inserted your sensor, the smart transmitter and the sensor must be
linked in order to start the Warm-Up Phase. Your smart transmitter can only be linked to one sensor at a time.
4. Inserting and Linking the Sensor
1.
Make sure your smart transmitter is turned ON
(see
Using the Smart Transmitter
) and that your
mobile device has access to the internet.
•
Position the smart transmitter directly over the
inserted sensor until the
Placement Guide
in the app shows some connection. The
Placement Guide page is located in
Menu
>
Placement Guide
.
2.
Navigate away from the Placement Guide page to
the Main Menu screen once you have confirmed there
is a signal.
Note:
The connection between the sensor and the
smart transmitter is sensitive to the orientation of the
transmitter. If the smart transmitter is directly over the
sensor and the Placement Guide indicates there is no
connection, try rotating the smart transmitter slightly
to the left or right so the power icon and LED are
parallel to the sensor.
LED indicator
(lights green
or orange)
Power button
LBL-1602-01-001 Rev N_Eversense User Guide_mgdL_R1.indd 32
LBL-1602-01-001 Rev N_Eversense User Guide_mgdL_R1.indd 32
2/26/20 12:58 PM
2/26/20 12:58 PM
