3
21
Eversense CGM User Guide
3. Getting Started
This section describes the initial start-up steps required before you can begin using your new
Eversense CGM System on a daily basis. You may perform these steps before your health care
provider inserts the sensor.
To get started you need:
•
Your mobile device to download the Eversense App.
•
Wireless internet connection.
•
This Eversense Smart Transmitter Pack that includes your smart transmitter and power supply.
Note:
If you have not received your Smart Transmitter Pack skip to instructions on downloading and installing the
Eversense App to your mobile device later in this chapter.
You may complete the following start-up steps before your sensor is inserted so that you can familiarize yourself with
the system.
2 easy start-up steps:
1. Download the Eversense App to your mobile device.
2. Set up the app – Create an Account, Pairing and Settings.
After you receive your smart transmitter it must be fully charged before pairing with the app.
Note:
Your smart transmitter is set to “sleep” status for shipping. When you charge the smart transmitter for the
first time, the status changes to active.
LBL-1602-01-001 Rev N_Eversense User Guide_mgdL_R1.indd 21
LBL-1602-01-001 Rev N_Eversense User Guide_mgdL_R1.indd 21
2/26/20 12:58 PM
2/26/20 12:58 PM
