manualshive.com logo in svg

EUROCOM UNO 2.1, User Manual

Share
Download
EUROCOM UNO 2.1 User Manual Download Page 59

Features & Components

2 - 2 Hard Disk Drive

2

Hard Disk Drive

The hard disk drive is used to store your data in the computer. The hard disk can be
taken out to accommodate two other 2.5"serial (SATA) hard disk drives with a
height of 9.5 mm.

The hard disk is accessible from the rear of your computer as seen below.

 

For further

details see 

“Upgrading the Hard Disk Drive” on page 6 - 6

.

Power Safety

Before attempting to ac-
cess any of the internal
components of your
computer please ensure
that the machine is not
connected to the AC
power, and that the ma-
chine is turned off. Also
ensure that all peripher-
al cables, including
phone lines, are discon-
nected from the comput-
er.

Figure 2 - 1

Hard Disk Location

Hard Disk

Summary of Contents for UNO 2.1
















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands