manualshive.com logo in svg

EUROCOM UNO 2.1, User Manual

Share
Download
EUROCOM UNO 2.1 User Manual Download Page 129

Modules & Options

7 - 14 Wireless LAN Module (Windows 8)

7

Desktop Mode

1.

Switch to the Windows Desktop (click the app or use the Windows logo key 

 

+ 

D

 key combination).

2.

Click the wireless icon 

 in the notification area of the taskbar.

3.

A list of available access points will appear.

4.

Double-click an access point to connect to it (or click it and click 

Connect

).

5.

Enter a network security key (password) if required, and click 

Next

.

6.

You can choose to share or connect to devices or not.

7.

Select any connected network and click 

Disconnect

 to disconnect from a 

connected access point.

Figure 7 - 10

Windows Desktop 

Taskbar Notification 

Area WLAN 
Connection

Summary of Contents for UNO 2.1
















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands