EUROCOM UNO 2.1 User Manual Download

Page: 210 / 271

Driver Installation D - 23

Windows 7

User Account Control

If a

User Account Control

prompt appears as part of

the driver installation procedure, click

Continue

Allow

, and follow the installation procedure as direct-

ed.

Windows Security Message

If you receive a

Windows

security message as part of

the driver installation process. Just click

“Install this

driver software anyway”

“Install”

to continue the

installation procedure.

You will receive this message in cases where the driv-
er has been released after the version of

Windows

you

are currently using. All the drivers provided will have
already received certification for

Windows

New Hardware Found

If you see the message “

New Hardware Found

” dur-

ing the installation procedure (

other than when out-

lined in the driver install procedure

), click

Cancel

to close the window, and follow the installation proce-
dure.



Driver Installation General Guidelines

The driver installation procedure outlined in this Chapter
(and in

Chapter 7 Options & Modules

), are accurate at

the time of going to press.

Drivers are always subject to upgrade and revision so
the exact procedure for certain drivers may differ slight-
ly. As a general guide follow the default on screen in-
structions for each driver (e.g.

Next > Next > Finish

)

unless you are an advanced user. In many cases a re-
start is required to install the driver.

Summary of Contents for UNO 2.1
















































































































































































































































































Search results

Summary of Contents for UNO 2.1

Reviews:

Related manuals for UNO 2.1

Brands by name

Popular brands

EUROCOM UNO 2.1, User Manual

Search results

Summary of Contents for UNO 2.1

Reviews:

Related manuals for UNO 2.1

Brands by name

Popular brands