manualshive.com logo in svg

EUROCOM UNO 2.1, User Manual

Share
Download
EUROCOM UNO 2.1 User Manual Download Page 165

Troubleshooting

8 - 8 Problems & Possible Solutions

8

The DVD-ROM cannot
be read.

The DVD-ROM is dirty. 

Clean it with a DVD-ROM cleaner kit.

The 

Optical Disk Drive

tray

 will not open when

there is a disc in the tray.

The compact disc is not correctly placed in the tray. 

Gently try to remove the disc using the eject

hole (see 

“Loading Discs” on page 2 - 3

).

The DVD regional codes
can no longer be
changed.

The code has been changed the maximum 

5 

times.

 See 

“DVD Regional Codes” on page 2 - 5

.

You forget the boot
password.

If you forget the password, you may have to discharge the battery of the CMOS.

 Contact your

service representative for help.

Problem

Possible Cause - Solution

Password Warning

If you choose to set a boot password, 

NEVER

 forget your password. The consequences of this could be serious. If you cannot

remember your boot password you must contact your vendor and you may lose all of the information on your hard disk.

Summary of Contents for UNO 2.1
















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands