manualshive.com logo in svg

EUROCOM UNO 2.1, User Manual

Share
Download
EUROCOM UNO 2.1 User Manual Download Page 151

Modules & Options

7 - 36 Intel® Smart Connect Technology

7

Intel Smart Connect & Intel Rapid Start Technology

Intel® Smart Connect Technology

 wakes the computer from 

Sleep

 mode in order

to update application information. 

Intel(R) Rapid Start Technology

 can resume

power from 

Hibernation

 within 5 to 6 seconds and can remember your computer's

previous state with zero power. 

Intel(R) Rapid Start Technology

 sends the com-

puter into 

Hibernate

 mode and skips the 

Sleep

 mode. Therefore if Rapid Start is en-

abled, Smart Connect will be unable to wake the system as Sleep mode has been
bypassed. In order to configure your system to run Smart Connect you will either
need to disable or delay the system from running Rapid Start.

Disabling or Delaying Rapid Start Technology

1.

Run

 Intel(R) Rapid Start Technology Manager

 from the 

Start

 menu or double-

click the icon 

 in the notification area of the taskbar.

Figure 7 - 30

Intel

®

 Rapid Start 

Technology 

Manager Access

Summary of Contents for UNO 2.1
















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands