manualshive.com logo in svg

EUROCOM UNO 2.1, User Manual

Share
Download
EUROCOM UNO 2.1 User Manual Download Page 102

BIOS Utilities

Boot Menu 5 - 13

5

Boot Option Priorities (Boot Menu)

Use the arrow keys to move up and down the menu, and press Enter to select a device
from the 

Boot Option #

 list. You can go to either 

CD/DVD ROM Drive Priorities,

Hard Drive BBS Priorities or Network Device BBS Priorities

 and press Enter to

select a device (the selected device will be highlighted in white).

OS Select (Boot Menu)

This item tells allows you to set the operating system you intend to use. This item
should be set before you install an operating system.

UEFI Boot (Boot  Menu > OS Select)

Enable/disable UEFI Boot from this menu. The Unified Extensible Firmware Inter-
face (UEFI) specification provides a clean interface between operating systems and
platform firmware at boot time. In contrast to BIOS, UEFI defines a set of standard
boot and runtime services. The 

Network Stack

 item will be enabled as an option un-

der UEFI Boot.

Summary of Contents for UNO 2.1
















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands