manualshive.com logo in svg

EUROCOM UNO 2.1, User Manual

Share
Download
EUROCOM UNO 2.1 User Manual Download Page 109

Upgrading The Computer

6 - 6 Upgrading the Hard Disk Drive

6

Upgrading the Hard Disk Drive

The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard
disk drives with a height of 9.5mm (h) (see 

“Storage” on page C - 3

). Follow your

operating system’s installation instructions, and install all necessary drivers and util-
ities (as outlined in 

“Driver Installation Procedure” on page 4 - 5

), when setting up

a new hard disk.

1.

Remove the rear cover (see 

“Removing the Rear Top Cover” on page 6 - 3

).

2.

Remove screws 

 - 

.

HDD System 

Warning

New HDD’s are blank. Be-
fore you begin make sure:
You have backed up any
data you want to keep from
your old HDD.
You have all the CD-ROMs
and FDDs required to in-
stall your operating system
and programs.
If you have access to the in-
ternet, download the latest
application and hardware
driver updates for the oper-
ating system you plan to in-
stall. Copy these to a
removable medium.

Figure 6 - 4

Hard Disk Screws

1

3

2

1

3

Hard Disk Slot

Make sure you install the hard disk
into the lower slot on the main-
board.

Summary of Contents for UNO 2.1
















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands