EUROCOM UNO 2.1 User Manual Download Page 227

Page: 227 / 271

D - 40 Wireless LAN Module (Windows 7)

Windows 7

Connecting to a Wireless Network in Windows 7

Make sure the Wireless LAN module is turned on.

Click

the taskbar wireless icon

, and then double-click an access point to connect to or click to

Open Net-

work and Sharing Center

if you do not see a network you want to connect to in the taskbar menu (a list of

options will appear allowing setting changes, and creating a new network).

Figure D - 24

- Click Taskbar Icon Menu & Network and Sharing Center



Network and

Sharing Center

You can also use the

Net-

work and Sharing Cen-
ter

control panel in

Windows (

Network and

Internet

) to connect to

any available wireless
networks.

Summary of Contents for UNO 2.1
















































































































































































































































































Search results

Summary of Contents for UNO 2.1

Reviews:

Brands by name

Popular brands

EUROCOM UNO 2.1, User Manual

Search results

Summary of Contents for UNO 2.1

Reviews:

Brands by name

Popular brands