EUROCOM UNO 2.1 User Manual Download Page 172

Page: 172 / 271

Intel Video Driver Controls

Intel Video Driver Installation B - 1

Appendix B: Intel Video Driver Controls

The basic settings for configuring the LCD are outlined in

“Video Features” on

page 1 - 26

Intel Video Driver Installation

Make sure you install all the drivers in the order indicated in

Table 4 - 1, on page 4 - 4

Video

Insert the

Device Drivers & Uti User’s Manual

disc

into the DVD

drive.

2. Click

2.Install VGA Driver > Yes

3. Click

Next

> Yes > Next > Next

4. Click

Finish

to restart the computer.

Dynamic Video Memory Technology

Intel

DVMT automatically and dynamically allocates as much system memory

(RAM) as needed (up to

1.7GB

) to the video system (

the video driver must be in-

stalled

). DVMT returns whatever memory is no longer needed to the operating sys-

tem.



DVMT Notes

DVMT is not local video
memory.

DVMT is not user-con-
figurable.

DVMT will not function
in MS-DOS. DOS uses
the legacy memory indi-
cated.

Summary of Contents for UNO 2.1
















































































































































































































































































Search results

Summary of Contents for UNO 2.1

Reviews:

Brands by name

Popular brands

EUROCOM UNO 2.1, User Manual

Search results

Summary of Contents for UNO 2.1

Reviews:

Brands by name

Popular brands