Essemtec Paraquda, Startup & Safety Manual

Page: 58 / 196

Human Machine Interface HMI
3-4
© Essemtec AG Paraquda Startup & Safety
000
00
03/
11
/
N
ov
emb
er 4
, 2
01
4
Set up Monitor type a
Usually the monitor is pre-adjusted and does not
need any setup. But in case of a bad setup, the
settings below are possible. For a detailed
description, consult the manual of the monitor.
Every button can have different functions,
depending on the menu.
On/Off Switch on and off
A
Call adjust menu (brightness, contrast, colors, v or h alignment etc.)
Select button (up) within menu
V Call brightness directly
Select button (down) within menu
+ Adjust button to increase value (e.g. brightness)
- Adjust button to decrease value (e.g. brightness)
Set up Monitor type b
Usually the monitor is pre-adjusted and does not
need any setup. But in case of a bad setup, the
settings below are possible. For a detailed
description, consult the manual of the monitor.
Every button can have different functions,
depending on the menu.
On/Off Switch on and off