Essemtec Paraquda, Startup & Safety Manual

Page: 128 / 196

Operating of the Machine
4-56
© Essemtec AG Paraquda Startup & Safety
000
00
03/
11
/
N
ov
emb
er 4
, 2
01
4
4.5.7 Change over a Product
Unload Material
Any Tab
Any Menu
Any Submenu
(STOP button)
Unload the PCBs from operating range (also
from conveyors, if installed).
Unload the feeders, if necessary for the new job
(follow the procedure described on chapter
'Handle FLX Feeders' on page
4-17 or Handle hyQ
Feeders on page 4-22 ).
Unload the medium and remove the dispense
module, if necessary.
Setup for new Product
•
If not available, teach a new recipe (see chapter 'Teach a Recipe' on page 4-56 ).
•
Set up the production (see page 4-44 ).
–
Define a job (if not available)
–
Assign components to the feeders
–
Mount the desired dispense module (if removed in step 1)
–
Assign medium to dispense valve
–
Optimize the process
–
Check the setup
•
Operate the production (see page 4-10 )
4.6 Teach a Recipe
Note: Please refer to the online help for detailed information on each topic.
Recipe Modifications: if recipe data changes during running production (e.g. new light
profile), the job has to be re-loaded to assume the changes.
4.6.1 Define Components
Overview
Composition of a Recipe