Essemtec Paraquda, Startup & Safety Manual

Page: 155 / 196

Operating of the Machine
Paraquda Startup & Safety © Essemtec AG
4-83
000
00
03/
11
/
N
ov
emb
er 4
, 2
01
4
Add Component to Recipe
First of all, the above created barcode has to be saved.
Teach
Recipe
The dialog pops up to save the created barcode.
Yes to save the new created barcode.
In the Save as dialog, type in a name for the barcode and press Save
Add the component to the recipe at the position
where it shall be placed.
Teach
Recipe
In the parameter section, select the desired
Recipe and press Edit.
Teach
Recipe
Components
Add new component (1) to add the label to the
component list and to define the location of the
component on the PCB.
Out of the column 'Component' (2), select the
created component (label).
In the column 'Identifier', type in the desired
identifier (e.g. LBL1).
In the columns 'X', 'Y', 'Rot', type in the necessary
coordinates to place the label at the correct
position on the PCB (the label is visualized in the
graphical section).
The recipe will be stored in a later step.