Essemtec Paraquda, Startup & Safety Manual

Page: 29 / 196

Safety
Paraquda Startup & Safety © Essemtec AG
1-13
000
00
03/
11
/
N
ov
emb
er 4
, 2
01
4
1.7 Specific Warnings
Specific warnings are included throughout the manuals in the relevant procedures. As a general
warning the following areas of the equipment present a particular hazard during installation, set-
up, operation and maintenance.
1.7.1 Electrical Hazard
The system operates with a 230 V power supply. Specific warnings are included throughout the
manuals in the relevant procedures. As a general warning the following precaution must always be
applied.
High voltage!
The system must be disconnected from the mains electrical power supply when a high
voltage label is encountered during installation, maintenance or setup.
Hazards or unsafe practices could result in severe personal injury or death.
Only qualified personnel is allowed to carry out any work on the system's power supply.
Never touch any components behind a cover or a door with a 'high voltage' label before the
equipment is disconnected from the main electrical power and locked against re-connecting.
Be aware, even switched off motors can induce a high voltage during manual movement of
any axis (generator principle).
1.7.2 Heat Hazard / High Temperatures
High temperature!
High temperature can cause severe burns. Keep hands and other parts of the body away
from all parts with a 'high temperature' label.
For servicing, allow these parts to cool before any handling on and around them.
High temperatures can ignite chemical substances. Avoid any contact of chemical substances
with hot surfaces
The X and Y Motors can reach temperatures of up to 95°C.
Never touch the motors as long as the machine is powered up