Essemtec Paraquda, Startup & Safety Manual

Page: 121 / 196

Operating of the Machine
Paraquda Startup & Safety © Essemtec AG
4-49
000
00
03/
11
/
N
ov
emb
er 4
, 2
01
4
Setup
Optimization
Out of the drop down list Maximum Number of
carriers per component, select the desired
number of carriers per component.
Select the desired Optimization mode out of
the drop down list. Possible variants are
Maximum performance or Minimum
changeover.
Optimize
As a result of the optimization the machine presents the proposal where to place the feeders and
where to place the components on the feeders (graphical section of screen). In addition the
production time and other parameters are displayed.
In case of any troubles associated with the production (e.g. too less feeders), the error window in
the parameter section is listing the appropriate components and messages.
Save setup as... if the proposal is accepted and the setup must be stored. Type in a name and
confirm with Save.
Program feeders to assume the proposal.
Print to get a printout for the setup.
To tune up feeder positions manually do the
following steps:
Setup
Optimization
Machine Setup
Move feeder, select the appropriate feeder and
move it to the desired final position.
Setup
Optimization
Save setup as... if the setup must be stored.
Type in a name and confirm with Save.
Program feeders to assume the new setup.
Print to get a printout for the setup.