ESET LAN Update Server 2.7 Installation Manual Download Page 84

Page: 84 / 84

Administration

Installation Guide

Log:

/log+ (-)

Enable (disable) log file creation

/wrap+ (-)

Enable (disable) wrapping text in log

/logappend

Enable (disable) appending to log file

/logrewrite

Enable rewriting of the Log file

/logsize=N

Set Log file to a maximum size of N KB

/log=<FILENAME> Set the Log file name (e.g.: /log=NOD.LOG)

Cleaning:

/cleanmode

Enables cleaning mode (the actions taken will depend on the

action settings)

/clean

Clean infected objects (if applicable)

/prompt

Prompt for an action when a virus is detected

/rename

Rename infected files

/delete

Delete infected files

/quarantine

Copy infected file to quarantine before taking further action

(clean/delete)

Note: If the switches:

/prompt

/rename

/delete

are used concurrently

with the

/clean

switch, the corresponding action will be carried out only

if the virus cannot be cleaned. The further along a parameter is listed,

the higher priority it has. For instance, using the

/clean /delete /prompt

parameters will result in that the

/prompt

parameter will supersede the

/clean /delete

parameters.

►

Summary of Contents for LAN Update Server 2.7





















































































Search results

Summary of Contents for LAN Update Server 2.7

Reviews:

Related manuals for LAN Update Server 2.7

Brands by name

Popular brands

ESET LAN Update Server 2.7, Installation Manual

Search results

Summary of Contents for LAN Update Server 2.7

Reviews:

Related manuals for LAN Update Server 2.7

Brands by name

Popular brands