ESET LAN Update Server 2.7 Installation Manual Download Page 75

Page: 75 / 84

Administration

Installation Guide

Installing NOD32 in a small network

Here are the basic, recommended steps to take when setting up a Mirror for

NOD32 in a small network of less than 10 workstations (for example):

Using your Username and Password, download and install NOD32

LAN Update Server (Mirror) version onto the machine that will always

be connected to the internet, at least through the working day, and will

therefore receive the virus signature updates from Eset automatically.

The correct version should either be for Windows 95/98/ME or Windows

NT/2000/2003/XP. Check out this machine’s operating system before

you download.
For Windows NT/2000/2003/XP/Vista, 32 or 64 bit:

http://www.eset.

com/download/balance.php?dir=/download/win/v2ad/ndntenad.exe

For Windows 95/98/ME:

http://www.eset.com/download/balance.

php?dir=/download/win/v2ad/nd98enad.exe

Its virus signature database will form the basis of a Mirror for the client

workstations.
For detailed instructions on downloading and installing NOD32 LAN

Update Server (Mirror) version (which is the same as installing the

Standard, single-user version) please click here:

http://download1.

eset.com/manuals/StandardInstallGuide.pdf

►

Summary of Contents for LAN Update Server 2.7





















































































Search results

Summary of Contents for LAN Update Server 2.7

Reviews:

Related manuals for LAN Update Server 2.7

Brands by name

Popular brands

ESET LAN Update Server 2.7, Installation Manual

Search results

Summary of Contents for LAN Update Server 2.7

Reviews:

Related manuals for LAN Update Server 2.7

Brands by name

Popular brands