ESET LAN Update Server 2.7 Installation Manual Download Page 68

Page: 68 / 84

Administration

Installation Guide

Problem:

During remote installation, the error “Could not retrieve required information

from target computer (RES error code 14, GLE error code 997)” may occur.

This problem occurs in some cases if an installation takes place from

NOD32 Remote Administrator Server which is located on a Windows 2003

Server system, and NOD32 is installed on a Windows 2000 operating

system.

Solution:

The system account, from which the NOD32 Remote Administrator service

is started, does not have the right to install. To solve the problem, start the

NOD32 RAS service from the Administrator’s user account.

Solution procedure:

click on Start > Settings > Control Panel > Administrative Tools >

Services
right click on the NOD32 Remote Administrator service, and from the

context menu choose Properties
choose This Account from the Log On tab and insert “Administrator”
click OK to close the window
click right mouse button on the NOD32 Remote Administrator service

and choose Restart from the context menu

After the installation succeeds, we recommend switching the NOD32

Remote Administrator service back to the default setting (local system

account).

►

►
►
►

Summary of Contents for LAN Update Server 2.7





















































































Search results

Summary of Contents for LAN Update Server 2.7

Reviews:

Related manuals for LAN Update Server 2.7

Brands by name

Popular brands

ESET LAN Update Server 2.7, Installation Manual

Search results

Summary of Contents for LAN Update Server 2.7

Reviews:

Related manuals for LAN Update Server 2.7

Brands by name

Popular brands