ESET LAN Update Server 2.7 Installation Manual Download Page 79

Page: 79 / 84

Administration

Installation Guide

For detailed installation instructions on a single PC, please refer to the

Standard Installation Guide available for download from our website (

http://

download1.eset.com/manuals/StandardInstallGuide.pdf

Installation command switches

/INSTMFC

this parameter turns on installation of MFC libraries – if it is necessary

– without asking. The MFC library must be located in the same directory

as SETUP.EXE. The installation program will check whether there

are newer libraries in the system (or none) and will proceed with the

installation accordingly.

/SILENTMODE

a mode without dialog windows – silent installation.

/REBOOT

after a silent installation is complete, the PC is not restarted by default,

even though it may be required. Using this parameter will switch the

restart option on.

/FORCEOLD

will install an older version of NOD32 over an existing version, without

providing a popup warning to the client (must be used in conjunction

with /REBOOT).

/CFG=

switch with a configuration name (if this parameter is not present,

NOD32.XML is used by default).

/SETTINGS=

name with obligatory SETUP.XML file (entered only if SETUP.XML is not

present in the installation folder, or has a different name).

/TEST

installation creates NSETUP.LOG, where the process of installation is

described in detail.

/PWD=

entering password for uninstall. This is important in case a current

version of NOD32 is protected by a password, and the administrator

intends to reinstall in silent mode.

/NUP=

if the value of this parameter is set (name of the file with component),

the installation does not require SETUP.XML for the whole installation,

but you can install only one component.

/UNINSTALL

uninstall of existing installation.

The switches with “=” require entering of a thread. It can be put into quote marks, but does

not have to. Quote marks are obligatory only if the thread contains spaces.

Summary of Contents for LAN Update Server 2.7





















































































Search results

Summary of Contents for LAN Update Server 2.7

Reviews:

ESET LAN Update Server 2.7, Installation Manual, Page: 79 / 84

Search results

Summary of Contents for LAN Update Server 2.7

Reviews: