ESET LAN Update Server 2.7 Installation Manual Download Page 20

Page: 20 / 84

Administration

Installation Guide

The first section is

General

and we’ll look at the Settings area. Here it is

advisable to ‘lock’ the settings in NOD32 and Password Protect them with a

password of your choosing, so that only

you

can alter the configuration on

any workstation, and not your clients.

The next section is

Notifications

. If you choose to have messages

sent to you about alerts/infiltrations on your client machines, you will need

to enter the SMTP server address (or IP address) that you use plus the

sender address should be entered

exactly

%ComputerName%@yourcompany.com

which will enable you to identify the relevant machine in your network. Pay

close attention to the way %ComputerName% is entered as this is case-

sensitive.

Also, enter the email address

you’d like the warnings sent to.

Also you can choose to have

Windows Messenger messages

sent via your LAN instead of, or

in addition to, the email method.

Here, you will just need to

enter the name(s) of the PC(s)

you’d like the messages sent

to, delimited by a semicolon or

comma.

Summary of Contents for LAN Update Server 2.7





















































































Search results

Summary of Contents for LAN Update Server 2.7

Reviews:

Related manuals for LAN Update Server 2.7

Brands by name

Popular brands

ESET LAN Update Server 2.7, Installation Manual

Search results

Summary of Contents for LAN Update Server 2.7

Reviews:

Related manuals for LAN Update Server 2.7

Brands by name

Popular brands