ESET LAN Update Server 2.7 Installation Manual Download Page 41

Page: 41 / 84

Administration

Installation Guide

3. Send via E-mail

(for all workstation platforms including Win95/98/ME operating

systems)

Alternatively, ‘Send via E-mail’ naturally sends the file nod32installer.exe

via e-mail. After the recipient(s) saves and runs the email attachment,

either remote installation, or remote uninstallation, of NOD32 for

Windows will start.

While on the ‘Remote Install’ tab in RAC, click on

the ‘Email...’ button.

In the new window choose

the required Package and

select addresses where the

nod32installer.exe file will

be sent. It is also advised to

define the Subject and Body

of the e-mail being sent out

to your clients.

For the RA server to work properly, it is required to set the SMTP server

address and sender e-mail address. In case this information is not

available, the e-mail can be sent using the Microsoft Outlook application

(Outlook Express is not supported).

►

Summary of Contents for LAN Update Server 2.7





















































































Search results

Summary of Contents for LAN Update Server 2.7

Reviews:

Related manuals for LAN Update Server 2.7

Brands by name

Popular brands

ESET LAN Update Server 2.7, Installation Manual

Search results

Summary of Contents for LAN Update Server 2.7

Reviews:

Related manuals for LAN Update Server 2.7

Brands by name

Popular brands