ESET LAN Update Server 2.7 Installation Manual Download Page 37

Page: 37 / 84

Administration

Installation Guide

Remote Installation

NOD32 Remote Administrator enables installations of NOD32 for Windows

to remote workstations in a network. In RAC, navigate to the “Remote

Install” tab.
RA offers three basic ways of how to install NOD32 for Windows remotely.

In all cases, a TCP/IP connection between the target workstations and

RAS is established on port 2224. That’s why a properly configured

TCP/IP protocol is among minimal requirements for a successful remote

installation.

1. Push the installation

(only for workstations with WinNT/2000/XP/2003/Vista operating systems)

The installation is “pushed” to remote workstations directly on the

administrator’s command.

While on the ‘Remote Install’ tab in RAC, click

on the ‘Install...’ button.
In the new window:

‘Package’ text box - select

your new package.
In the left hand panel,

select maybe one client to

start with, drag him over to

the right hand panel and click the ‘Install’ button at the foot of the panel.

The console will ask for the administrator’s username and password for

this situation. You will need to specify whether the workstation is located

in a domain or in a workgroup.

By ‘pushing’ to just one client, you can make sure you get the result you

were hoping for.

►

Summary of Contents for LAN Update Server 2.7





















































































Search results

Summary of Contents for LAN Update Server 2.7

Reviews:

Related manuals for LAN Update Server 2.7

Brands by name

Popular brands

ESET LAN Update Server 2.7, Installation Manual

Search results

Summary of Contents for LAN Update Server 2.7

Reviews:

Related manuals for LAN Update Server 2.7

Brands by name

Popular brands