ESET LAN Update Server 2.7 Installation Manual Download Page 27

Page: 27 / 84

Administration

Installation Guide

NOD32 On-Demand Scanner

Profiles are so you can save a set of pre-set scanning parameters when

running on-demand scans. Any of the following profiles can be set as the

primary, default scanning profile:

Control Center Profile - NOD32:

the default setup for on-demand

scans and/or scheduled scans. Set parameters when selecting

desired disks, drives or specific folders, etc.

Context Menu Profile:

parameters when running an ‘instant’ scan on

any desired file or folder (Right click on the file and choose ‘NOD32

antivirus system’)

Control Center Profile - Local:

parameters when only scanning

local disks.

Control Center Profile - In-Depth Analysis:

parameters when

running an in-depth analysis.

Control Center Profile - Diskettes:

parameters when only scanning

floppy diskettes.

My Profile:

create and save a profile with your own settings.

The above headings are to give the user a selection of names for specific

scans. You can create, and name, as many new profiles as you wish. You

might like to create names that are more specific for your clients, or easier

to understand perhaps. To create, click Profile in the toolbar and choose

‘New profile’ or right click on a ‘Profile’ in the Configuration Editor window

and choose ‘New profile’ from the context menu.
Again, generally speaking, the default settings for NOD32’s On-Demand

Scanning are probably adequate, secure and recommended. Eset’s

developers have designed NOD32 to be ‘ready-to-go’ without the necessity

for major setup changes.
Under the ‘Settings’ sub-heading in ‘My profile’, the ‘

Run this profile in

cleaning mode

’ option, enables the NOD32 scanner to run in a cleaning

mode. ie: The actions taken when a virus is found depend on those set

under ‘If an alert is generated’ (and ‘If cleaning cannot be performed’).

►

Summary of Contents for LAN Update Server 2.7





















































































Search results

Summary of Contents for LAN Update Server 2.7

Reviews:

Related manuals for LAN Update Server 2.7

Brands by name

Popular brands

ESET LAN Update Server 2.7, Installation Manual

Search results

Summary of Contents for LAN Update Server 2.7

Reviews:

Related manuals for LAN Update Server 2.7

Brands by name

Popular brands