ESET LAN Update Server 2.7, Installation Manual

Page: 47 / 84

Administration Installation Guide
47
To run the On-Demand Scan task in cleaning mode (not in the default
mode, where the scanner only creates a scanner log, and any reported
infiltrations are left on the target client computer), check the ‘Clean
automatically’ option. Then, if an alert is generated, the scanner will
then take the action defined in your configuration automatically (NOD32
Configuration Editor ---> NOD32 On-Demand Scanner ---> Profile --->
Scanner ---> If an alert is generated/If cleaning cannot be performed).
In the next step, choose workstations or groups, to which you want to
assign the scan configuration (put them in the ‘Selected items’ section).
Click on the ‘Add from Clients Pane’ to add currently displayed clients
to the pane under ‘Selected items’. Check the ‘Selected’ option to move
only those clients which were highlighted in the left hand ‘Clients’ window.
Alternatively, you can select some or all clients that are listed and click the
button to add them to the list under ‘Selected items’ in the right hand
panel.
And finally name the task, or add a description to it. These features serve
only for easier orientation for the administrator, who can thus later quickly
identify tasks. At the same time, you can ‘Apply task after’ and choose a
time and date, or delete it from the ‘Tasks’ tab of the RA console after it
has been completed (Delete tasks automatically by cleanup if successfully
completed).