ESET LAN Update Server 2.7 Installation Manual Download Page 78

Page: 78 / 84

Administration

Installation Guide

Creating a common configuration

If you are manually installing NOD32 onto workstations, you can setup a

configuration that the workstations in your network can all use, which could

save a lot of time configuring each machine later:

On your machine (assuming that is where NOD32 LAN Update Server

[Mirror] version is installed), go Start > Programs > Eset > Configuration

Editor.
This will open a default configuration window which you can then adjust

the settings to suit your needs.
The most significant section is under

Update\Profile

(My Profile)

Settings

where the internet connection type must be selected and the

update server must be specified, ie: the name or IP address of your

machine (where the Mirror is). The Username and Password should

remain blank as the clients are updating locally from your machine.
More details about using the Configuration Editor can be found on page

17.
More details about creating a secondary update profile for clients with

laptops that are taken away from the office regularly, can be found on

page 30.
Save this configuration to your desktop as

nod32.xml

Next download from the Eset website, using your Username and

Password, and save to

your

desktop, the version(s) of NOD32 that you

will be installing on your client’s PCs. Do not run the installer(s).
Next, right click on the installer and choose ‘Extract to...’ or ‘Extract

files...’ (will depend on the archiving program you use). Choose to save

the contents to a new folder on your desktop. Name the folder ‘NOD32

Install’ or any special name you wish, but for this explanation, I’ll use

‘

NOD32 Install

’.

In that folder,

add

the

nod32.xml

file that you’ve just created.

Now while inside the

NOD32 Install

folder, create a new text document

(Notepad) and type the following text line into it:

(Pay close attention to where the spaces are, or better still, copy and

paste from this document). A full list of the installation command switch

options are on the next page.

Rename that text document to

setup.bat

Copy the

NOD32 Install

folder onto a CD, flash key or any removable

media capable of storing this folder which will be around 9MB in size.
Insert the CD or flash key on the first target PC, open the

NOD32

Install

folder and double click the batch file

setup.bat

This will only take a few seconds and the PC will reboot and start

collecting updates from the Mirror on your machine automatically.
Run the

setup.bat

file on each machine in your network.

►

►
►

►

►
►

►

setup.exe /instmfc /silentmode /forceold /reboot /showrestart /cfg=nod32.xml

Summary of Contents for LAN Update Server 2.7





















































































Search results

Summary of Contents for LAN Update Server 2.7

Reviews:

Related manuals for LAN Update Server 2.7

Brands by name

Popular brands

ESET LAN Update Server 2.7, Installation Manual

Search results

Summary of Contents for LAN Update Server 2.7

Reviews:

Related manuals for LAN Update Server 2.7

Brands by name

Popular brands