Esaote O-scan eXP, User Manual

Page: 139 / 242

350004900 Rev. 07 17 / 20
•
•
•
•
•
•
Patient seat and cinematic devices
Up/down movement of the hand is prevented - with respect to the
plate - thanks to the four pins in the area of forearm (see figure
above).
10
take note of the number of each of the six holes used. if the patient is
monitored subsequently (follow up) the operator can thus reproduce
the identical positioning of the limb with respect to the plate
11
close the three Velcro straps around the region examined
12 insert the plate on the guide - mounted on the support and coil - as
shown in the figure below
fig. 6.15 - Inserting the plate in the guide (up coil 2 and down coil 3)
13
center the anatomic region examined with respect to the coil (and
therefore the magnet isocenter) moving the plate along the guide until
the optimal position is found
14
tighten the plate knob near the graduated scale