Esaote O-scan eXP, User Manual

Page: 83 / 242

350004900 Rev. 07 3 / 22
•
•
•
•
•
•
In
st
al
lation
Guidance and manufacturer's declaration - electromagnetic emissions
The O-scan system is intended for use in the electromagnetic environment specified below. The customer or
the user of the system should assure that it is used in such an environment.
Emission Test Compliance Electromagnetic environment - Guidance
RF Emissions
CISPR 11
Group 2 The O-scan system must emit electromagnetic energy in order to
perform its intended function. Nearby electronic equipment may be
affected.
See note and warnings below this table.
RF Emissions
CISPR 11
Class A O-scan is suitable for use in all establishments, other than domestic and
those directly connected to the public low voltage power supply
network that supplies buildings used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Compliant
Class A
Voltage
fluctuations/flicker
emissions
IEC 61000-3-3
Compliant
N o t e
The EMISSIONS characteristics of this equipment make it suitable for
use in industrial areas and hospitals (CISPR 11 class A). If it is used in
a residential environment (for which CISPR 11 class B is normally
required) this equipment might not offer adequate protection to
radio-frequency communication services. The user might need to take
mitigation measures, such as relocating or re-orienting the
equipment.
W a r n i n g
Use of this equipment adjacent to or stacked with other equipment
should be avoided because it could result in improper operation. If
such use is necessary, this equipment and the other equipment
should be observed to verify that they are operating normally.