To avoid injury or damage to the equipment, only qualified service
technicians are to install the metal detector at customer sites in
accordance with local safety codes.
CAUTION
To avoid injury or damage to the equipment, all electrical installations
are to be performed by qualified and competent personnel authorized
by Eriez Manufacturing Company. All electrical installations are to be in
compliance with local safety codes. Ensure that all materials used in
the installation of the equipment are suitable and appropriate for
purpose.
CAUTION
For continued compliance with electrical safety standards, the
protective earth connection from the power source must be connected
directly to the protective terminal on the wall of the enclosure. This is
required to be the FIRST connection to the terminal, and secured with
a star lock washer and nut, independent of any other connections to
the terminal.
CAUTION
An external disconnect switch labeled “Metal Detector” must be
installed near the metal detector to allow the metal detector to be
completely disconnected from the power source during installation and
maintenance. All lock-out tag-out procedures and local safety codes
are to be followed during metal detector installation and maintenance.
The metal detector must not be positioned in a way that makes it
difficult to operate the disconnect switch.
CAUTION
2
Summary of Contents for Xtreme
