1
00315
AGDS-2em v2
Installation Instructions
The AGDS-2em v2 is a single or two channel gas detection system.
Up to two low voltage detectors can be connected for the detection of natural gas, LPG, carbon monoxide,
carbon dioxide and oxygen depletion.
In the event of a high alarm from one of the detectors, the system will isolate a connected control valve.
Low alarm indication is also given.
It is designed for use primarily in boiler house.
Product Dimensions 180mm x 130mm x 70mm
Before commencing installation please familiarise yourself to the equipment by reading the comprehensive
installation instructions. If in doubt then please call 0161 233 0600. Out of hours please call 07894 684080 or
07843 355163.
It is a statutory requirement that this safety system is installed and commissioned
to the satisfaction of the manufacturer.
A commissioning certificate must be issued to the end user along with instructions for the operation of the
equipment.
As the Manufacturer Medem UK should commission this safety system whereupon a commissioning report
will be forwarded to the installing agent who should provide a copy to the end user.
At the point of our commissioning an individual serial number will be attached to the system along with a 24
help line number. Photos and all relevant information for the installation will then be stored on the Medem
site database to be accessed in the event of a call on the 24 hour help line. The warranty period for the
panel and sender unit will then be extended to Ten years.
•
Gas Detection. (one or two detectors)
•
Natural gas, LPG, carbon monoxide & carbon dioxide
•
Remote emergency stop & Fire Alarm monitoring
•
BMS relay (selectable alarm status inc. high alarm)
•
5 year warranty - 10 years when commissioned
AGDS-2em v2 features
