Eriez Xtreme, Reference Manual

Page: 82 / 122

1. On the task bar press “Verification
Needed”.
2. Press the metal type you wish to test.
3. Pass the listed metal on the product
through the aperture and press the “Stop”
button.
4. Select Pass, Fail, or Retry and repeat the
process if necessary for the other metals.
5. “B Detection” indicates that a boundary
detection occurred. The “B” matches the
indicator placed in the reject log for
boundary detections.
6. Press “Verification Complete” when all
metals have been tested.
1 2
3
4
6
UI
“HOW TO” PERFORM A VERIFICATION CHECK
5
Test Count.
Only shown if
Tests per count
is greater than 1
Test Count.
Only shown if
Tests per count
is greater than 1
80