Ericsson EFN324, User Manual, Page: 98 / 176

IndexIndex
1. On the PC, start HyperTerminal and make a new connection or session,
saving it with the following attributes (in this example, the COM1 port on
the PC is used):
Name:
terminal_9600
Connect using:
Direct to Com1
Bits per second:
9600
Data bits: 8
Parity:
None
Stop bits: 1
Flow control: none
1. Press ENTER to start a CLI session.
13.3 Using Telnet
Prerequisites
To be able to connect to the switch remotely, the switch has to have the
following basic configuration:

IP address, subnet mask and default gateway.

One Ethernet port connected to the Management VLAN, for example, the
uplink port 25.
S
tart a Telnet session in Windows by clicking Start

Run… , type
telnet <IP address>
and click
OK
.