Ericsson EFN324, User Manual, Page: 124 / 176

IndexIndex
Caution!
Burst tolerance values that are set lower than the default values may
cause too strong a limitation of the flow.
Example:
efn#
set bandwidth_limitation 12 bandwidth 12000
burst_tolerance auto
13.8.9 set connection
Use this command to configure specific attributes that may be associated with
a connection between a switching domain and an Ethernet port. See also
add
connection
in section 13.8.1 on page 107. Use the command
reset
connection
to reset to default values and
unset connection
to reset to
undefined values.
Syntax
set connection vlan <vlan> ethernet_port <port>
[multicast_group_limit <groups>]
[option_82_remote_id <remote­id>]
[option_82_circuit_id <circuit­id>]
unset connection vlan <vlan> ethernet_port <port>
static_multicast_groups
Arguments:
vlan <vlan> ­
The number of the Switching Domain. Range 1 to 200.
ethernet_port <port> –
The number of the Ethernet port. Range 1
to 26.
multicast_group_limit <groups> ­
Maximum number of
simultaneously active multicast streams, that is, how many streams can be
‘joined’ at a certain point of time. This parameter is defined using
set
or
unset
commands. Range 1 to 100 or undefined.
option_82_remote_id <remote­id>
­ Content of remote ID
Suboption to be used for Option 82. This parameter is used when